How to Install Zehnder Comfosystems Part 1 – HRV


You may also like

How to Install Zehnder Comfosystems Part 2 - HRV
Filmed on a real job site, these videos will help new installers understand the simplicity and ease of installing the Zehnder ComfoSystems heat recovery ventilation systems.
Zehnder ComfoFlex Installation
In this video, you will learn how to attach the ComfoFlex onto the register box to ensure an air tight seal. ComfoFlex is used in some projects, and has a different attachment process than ComfoTubing.
Zehnder ComfoFlex Splicing
In this video you will learn how to splice our ComfoFlex tubing to make for longer runs that ensure air tightness.
Changing Zehnder CLD Return Filters
Gary Bagget explains how to change out the CLD filters for the Zehnder CLD return register.
Pre-Commissioning a CAQ Unit Start Up
Gary Bagget walks viewers through how to start up the CAQ Units and how to run the pre-commissioning start up program. After this process has been completed, a commissioning can be requested.
Changing Zehnder Cone Filters
Gary Bagget explains how to change out the cone filters on the Zehnder return valves.
Wiring on the ComfoAir Q - Option Box, Lan-C, Boost Switches and More
Join Service Manager Gary Baggett as he demonstrates how to properly wire options to the Zehnder CAQ Unit. Options discussed include Option Box, boost switches, LAN-C, controllers and more.
Wiring LAN C and ComfoSense C67 to a ComfoAir Q
Gary Baggett walks through the wiring of a LAN C and the ComfoSense C67 controller to a Zehnder ComfoAir Q unit